|
 |
3G/HD/SD Up/Down/Cross Converter
UFM-30UDC |
 |
 |
UFM-30UDC is an up/down/cross converter, which can be mounted on UFM frame. It is standardly equipped with next-generation broadcast signal interface 3G-SDI and it allows users to convert video signals in a wide variety of formats.
 Up/down/cross converter equipped with 3G/HD/SD-SDI input/output
3G Level A and Level B supported
3G/HD/SD-SDI 1 input / 2 outputs and analog composite 1 input
Additional 3G/HD/SD-SDI output for preview use
Analog composite output for displaying menu (monitoring also possible)
Up to 8 channels embedded audio input/output
Frame synchronizer
Aspect ratio converter
On-Screen Display (OSD) available on Preview output
| Specifications |
|
| Standard |
3G: 1080/59.94p 1080/50p
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
SD: 525/60 (NTSC) 625/50 (PAL)
(Auto Detect)
Output frame rate will follow input frame rate (no frame rate conversion is performed). |
| Video Input |
3G-SDI: 2.970/1.001Gbps (Level A or Level B) or
HD-SDI: 1.485/1.001Gbps, or
SD-SDI: 270Mbps, 75Ω, 1 input, BNC
Analog Composite: 1.0Vp-p, 75Ω, 1 input, BNC |
| Reference Input |
BB: NTSC: 0.429Vp-p/PAL: 0.45Vp-p or Tri-level sync: ±0.3V (Supply from UFM frame) |
| Video Output |
3G-SDI: 2.970/1.001Gbps (Level A or Level B) or
HD-SDI: 1.485/1.001Gbps, or
SD-SDI: 270Mbps, 75Ω, 2 outputs, BNC |
| Preview Video Output |
3G-SDI: 3.0Gbps (Level A or Level B), or
HD-SDI: 1.5Gbps, or
SD-SDI: 270Mbps, 75Ω, 1 output, BNC |
| OSD Output |
Analog Composite NTSC or PAL: 1.0Vp-p, 75Ω, 1 output, BNC |
| Audio Input/Output |
Embedded Audio I/O: HD: 8 channel / 8 channel (4 channel stereo), SD: 4 channel/4 channel (2 channel stereo) |
| Input Cable Length |
3G-SDI (Level A): Approx. 100m
HD-SDI: Approx. 140m
SD-SDI: Approx. 300m |
| Sync Mode |
Reference lock Mode / Input Synchronizer Mode / Free-run Mode (Selectable) |
| Aspect Ratio Mode |
4:3, 13:9, 14:9, 16:9, Conversion with Fit to width or Fit to height |
| I/O Delay |
1 frame to 2 frames + 200µsec |
| Temperature / Humidity |
0ºC - 40ºC / 30% - 85% (no condensation) |
| Power |
Supply from UFM Frame, +24VDC |
| Dimensions |
106 (W) x 293.2 (D) mm (Front board),
108.5 (W) x 103.3 (D) x 20 (H) mm (Rear board for remote control) |
| Weight |
Weight Approx. 0.5kg |
| Require Slot |
UFM 1 slot
*Can be installed only into UF-112, not into UF-106/106A. |
| Accessory |
Operation Manual |
This information is subject to change without notice.
|
