Tweet

HD/SD Frame Rate Converter
UFM-30FRC

This modular-type UFM-30FRC Frame Rate Converter can be installed in the UFM frame. The UFM-30FRC is provided with a motion compensation processing mode and linear converter mode to perform optimal conversions in accordance with the target videos. It is equipped with up-, down-, and cross-converters as standard features. The UFM-30FRC can perform wide-ranging format conversion.

Enables switching between motion compensation processing mode and linear converter mode
The UFM-30FRC is provided with two types of conversion mode, namely a “motion compensation
processing mode” and a “linear converter mode”. The former detects the motion vector amount of a
moving object and generates the object’s motion in frames. The latter performs a simple frame-rate
conversion based on the previous and next frames. You can use either mode in accordance with your
application.
HD/SD-SDI and analog composite input and output support
The UFM-30FRC provides various format input and frame-rate conversion support such as 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 525/60, and 625/50.
Equipped with up-, down-, and cross-converters
In addition to the standard frame-rate conversion, the UFM-30FRC can perform up-conversion from SD signals to HD signals, down-conversion from HD signals to SD signals, and cross-conversion between 1080i, 1080PsF and 720p.

Block Diagram

Specifications

Video Format	HD: 1080/59.94i, 1080/50i, 1080/23.98PsF, 720/59.94p 720/50p SD: 525/60 (NTSC) 625/50 (PAL)
Video Input	Analog Composite: 1.0 Vp-p
	HD-SDI: 1.5 Gbps SD-SDI: 270 Mbps 75, BNC x 1
	*HD/SD-SDI or analog composite can be selected from the input select menu.
Genlock Input	BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p or Tri-level sync: ±0.3 Vp-p, 75, BNC x 1
Sync Mode	Reference lock mode / Input mode / Free-run mode
Phase Control	Reference lock mode: System horizontal phase ±1/2 H
Video Output	HD-SDI: 1.5 Gbps SD-SDI: 270 Mbps 75, BNC x 2 (distributed)
Monitor Output	Analog Composite: 1.0 Vp-p ±0.1V, 75, BNC x 1 *It can be used when SD-SDI output is selected.
Proc Amp	Set up level: -14.0% to +14.0% (0.1% step) Y level: 70.0% to 130.0% (1.0% step) Chroma level: 70.0% to 130.0% (1.0% step)
Audio Input/Output	Embedded Audio: 16 channels (GROUP 1 - 4), 48 kHz *asyncronous audio is not supported.
Temperature / Humidity	0ºC - 40ºC / 30% - 85% (no condensation)
Power	Supply from UF Frame, +24 VDC
Draw	Approx. 0.5 A
Dimensions	106 (W) x 310.6 (D) mm (Front board)
Dimensions	108.5 (W) x 71 (D) x 20 (H) mm (Rear board)
Weight	Approx. 0.5 kg
Require Slot	1 slot
Accessory	Operation manual