 |
 |
|
SD/Analog Frame Synchronizer & TBC
UFM-145DFS |
 |
 |
The UFM-145DFS is a module-type TBC/FS with the supreme analog composite to/from digital component converter, It has wide internal genlock capability, so that almost any SD-SDI or composite signal can be genlocked.
 |
Supreme composite to/from digital component converter. |
|
Line sync or Frame sync selectable. |
|
10-bit digital Y/C comb filter. |
|
10-bit 4:2:2 component system adopted for internal signal processing. |
|
SD-SDI ANC data pass through. |
|
SD-SDI signal EDH enable/disable. |
|
Proc Amp function. |
|
Monitoring analog composite available. |
|
Dedicated optional audio interface, UFM-100AED, enables embedded/de-embedded audio. |
|
Hot-swap architecture. |
| Specifications |
|
| Video Formats |
525/60 (NTSC) or 625/50 (PAL) (Auto detect) |
| Video Input |
Selectable as below |
| Analog composite: 1.0 Vp-p 75Ω BNC x 1 |
| Digital component: 270 Mbps 75Ω BNC x 1 |
| Genlock Input |
BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p 75Ω, BNC x 1 |
| Video Output |
Analog composite: 1.0 Vp-p 75Ω BNC x 1 (for monitoring)* |
| Digital component: 270 Mbps 75Ω BNC x 2 |
| Signal Processing |
4:2:2 component |
| Correction Range |
2 fields (field inversion prevented) |
| Sampling Frequency |
Y: 13.5 MHz, C: 6.75 MHz |
| Quantization |
10-bit |
| Frequency Response |
100 kHz - 4.2 MHz: -0.5 dB - +0.5 dB, 4.2 MHz - 5.0 MHz: -1.0 dB - +1.0 dB, roll off above 5.0 MHz (NTSC) |
| 100 kHz - 5.0 MHz: -0.5 dB - +0.5 dB, 5.0 MHz - 5.5 MHz: -1.0 dB - +1.0 dB, roll off above 5.5 MHz (PAL) |
| S/N Ratio |
56 dB |
| DG/DP |
1.5% / 1.5º (APL: 50%) |
| K-Factor (2T Pulse) |
Less than 1% |
| H/V Tilt |
Less than 1% |
| Proc Amp |
Video Level: -3 dB to +3 dB
Chroma Level: -3 dB to +3 dB
Setup Level: -15 IRE to +15 IRE
Chroma Phase: -30º to +30º |
| Genlock Phase Control |
H phase: -2 ?s to +2 ?s |
| Temperature / Humidity |
10ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
Supplied from UFM frame, +12 V DC to +24 V DC ±10% |
| Power Consumption |
11 VA (11 W) |
| Dimensions |
106 (W) x 303 (D) mm (Front board)
106 (W) x 66.1 (D) mm (Rear board) |
| Weight |
0.5 kg |
| Slot Requirement |
1 slot |
| Accessories |
Operation manual |
| Require Slots |
1 slot |
| Option |
UFM-100AED: Audio multiplexer/demultiplexer |
*SC phase of Analog Composite output does not sync with system phase. |
