FOR-A Global - HD/SD Virtual Studio &amp;amp;amp; RCG System digiStorm

HD/SD Virtual Studio & RCG System
digiStorm

digiStorm: An exciting creation of the combined expertise of FOR-A and Brainstorm

"digiStorm" is the state-of -the art on-air graphics solution created by the joint development efforts of FOR-A and Brainstorm Multimedia. When the technological resources of FOR-A, a hardware manufacturer and virtual studio integrator, and Brainstorm's eStudio, a virtual studio software program which has been well-established throughout the world, are fused together, the resulting synergy effect opens up a world of "broadcast graphics". Through this new and exciting on-air graphics solution, immediate form is instantly given to the powers of creative imagination.

The digiStorm Advantage

Offered by FOR-A and Brainstorm Multimedia, digiStorm is a system solution providing numerous features for smooth operation of broadcast graphics and virtual studios. The hardware design is based on FOR-A's accumulated technology and extensive expertise in the system integration field. A number of software packages are also provided to facilitate setup and operation.
With digiStorm, operation processes become simpler. Some of the key technologies used in digiStorm are presented here.

	Hardware and software behind the digiStorm system

		Key software
	-	Brainstorm eStudio: The ultimate on-air graphics software with superior rendering capability
	-	Brainstorm Easyset3D: Software that enables easy operation of virtual studios

		Operation support
	-	ifCalibSTD: Camera calibration software A powerful support tool that performs lens and position calibrations essential for operation
	-	Brainstorm Controller: System operation software Creates transmission/event lists and performs data linkup using ODBC/CSV

		Creation support
	-	Data Converter: Data conversion software Converts data from 3D graphics software (Maya, 3ds Max, Softimage XSI)
	-	eLibrary: Virtual Studio set library

		Linkage with studio sub-control systems
	-	System linkage with HANABI: Enables seamless virtual studio/RCG operation

		Consolidation of system equipment
	-	MBP-1244 + MBP-12CK: Video card + Chroma keyer Equipped with camera input, video wall input, chroma key composite output, delay line, DSK, etc., this creates a virtual system on a single PC, realizing a compact and low cost virtual system.device.

		Efficient usage of equipment
	-	DSC-100/200: digiStorm controller Traffic center for various types of data in the virtual system

	digiStorm System

FOR-A's digiStorm system makes it possible to realize a 3D virtual studio system and RCG system more effectively, more efficiently, and with higher cost-performance than ever before. For example, whereas one CG processor is required for each camera in a regular virtual studio system, with the digiStorm system, one CG processor can support multiple cameras. FOR-A's long record of experience in video equipment development and system engineering enabled us to develop this system. Its tremendous power for content creation is being realized in broadcast stations, BS/CS stations, CATV stations, schools, and a wide range of other fields.

System example 1: RCG system

	System consisting of one VRCG terminal with one camera Click here

	-	Effective for adding to existing studios and usage in live relay at sports events.
	-	Supports various sensors.
	-	By using the MBP-12CK and not just the MBP-100CK, compact operation with a single PC is possible.

System example 2: HANABI linkage system

	System consisting of one VRCG terminal with multiple cameras Click here

	-	When it is the primary selection (camera input switching) with the HANABI video switcher, the serial tally signal inputs to DSC-100/200 and switches the camera sensor signal.
	-	A system with one PC and multiple camera systems can be build, which offers you low cost and simple operation.

System example 3: HANABI & VRP system

	System consisting of two VRCG terminals with multiple cameras Click here

	-	When there is just one CG terminal, you cannot check PREV composite video, but by setting up a PREV terminal, it is possible to check not only PGM composite video but also PREV composite video. Effective for switching, checking and camera return video during live broadcasts.
	-	The PREV terminal can also be used as a delivery backup terminal to build a highly reliable system.

Other possible system configurations are possible depending on the environment and application. For please cdetails,ontact FOR-A.

	Products

	VRP-70HS/S Chroma keyer / Virtual Processor

			This virtual processor accepts the input of images from cameras, and it combines 3-dimensional computer graphics linked to the camera parameters. It is ideal as an HD or SD chroma keyer.
			...more info

	VRP-RUA Remote Control Unit

			Remote control unit enabling centralized control over the VRP series.
			...more info

	DSC-100/200 digiStrom Controller

			The DSC-100/200 is an interface controller that serves as the traffic center for the wide array of data in the virtual system.
			...more info

	HANABI Series Digital Video Switcher

			Hanabi SD and HD Digital Video Switchers offer high performance and great functionality in the world's most compact, 2M/E, 4-RU main frame system. 1M/E version is also available.
			...more info

	MBP-1244 Video Card

			A new video card for creating the next-generation HD production environment. Can be used as a chroma keyer and CG processor in a virtual system.
			...more info