Analog Video Cable Compensator (1 x 6)
CC-106

  • Outline
  • Specifications
  • Documents
Contact

1 x 6 composite video distribution, plus built-in cable compensation to offset long line connection signal loss.

Compensates long line connection signal loss and decline of input video frequency.
Distributes an input video up to 6 outputs.
Max. cable equalization: 300 m (1,000 ft) when 5C-2V.

Specifications
Specifications  
Video Input Analog composite: 1.0 Vp-p, loop-through BNC x 1
Video Output Analog composite: 1.0 Vp-p 75Ω BNC x 6
Frequency Response 60 Hz to 12 MHz ±0.5 dB; roll off above 12 MHz (when 0 m cable equalization)
Tilt 60 Hz, Less than 1% (when 0 m cable equalization)
Overshoot 15 kHz, Less than 1% (when 0 m cable equalization)
DG/DP 0.3% / 0.3º (when 0 m cable equalization)
Cable Equalization Max. 300 m (5C-FB or equivalent)
Max. 200 m (3C-2V or equivalent)
Temperature / Humidity 0ºC to 40ºC / 30% to 90% (no condensation)
Power 100 V AC to 117 V AC or 220 V AC to 240 V AC ±10%, 50/60 Hz *
Consumption 5 VA (Voltage must be specified when ordering.)
Dimensions / Weight 215 (W) x 44 (H) x 120 (D) mm / 1.2 kg
Accessories Operation manual, AC cord
Options Single mount or dual mount rack brackets
* To change the voltage range from 200 V to 100 V, or vice versa, after purchasing products, consult your FOR-A reseller. Components need to be replaced in the FOR-A factory.
Documents
Related Products

VDA-106A

1x6 or dual 1x3 composite video distribution amplifier unit.

ADA-205A

The ADA-205A is a high performance balanced audio distribution amplifier capable of producing up to 10 monaural outputs from 1 monaural input.

UFM-30DDA

Modular-type HD/SD-supported digital video distributor that can be mounted on UFM frame.

UFM-15VEA

The UFM-15VEA is module-type analog video distributor that can be installed in the UFM frame. It can distributes one input into five outputs. A cable compensation function is also included. They are also equipped with an input signal relay bypass function.

UFM-15VDA

The UFM-15VDA is a module-type analog video distributor that can be installed in the UFM frame. It can distribute one video signal input into five outputs. They are also equipped with an input signal relay bypass function.

UFM-18VDA

The UFM-18VDA is a module-type analog video distributor that can be installed in the UFM frame. It can distribute one video signal input into eight outputs. They are also equipped with an input signal relay bypass function.

Contact
PageTop