 |
 |
|
Analog Video Distribution Amplifier (1 x 6 or Dual 1 x 3)
VD-211A |
 |
 |
Distributes an analog composite signal (1 input to 6 outputs). Analog component distribution is also available by using 3 units.
 A video distribution module for use in our DF-300A/DF-300 distribution frame.
Basic 1 x 6 video distribution module.
Can also be used as dual 1 x 3 video distributor by changing the settings.*
| Specifications |
|
| Video Input |
Analog composite: 1.0 Vp-p, 75Ω or loop-through (internally selectable), 1 input (at 1 x 6 distribution) / 75Ω 2 inputs (at dual 1 x 3 distribution)* |
| Video Output |
Analog composite: 1.0 Vp-p, 75Ω 6 outputs (at 1 x 6 distribution) / 3 outputs x 2 (at dual 1 x 3 distribution)* |
| Frequency Response |
60 Hz to 10 MHz, ±0.5 dB; roll off above 10 MHz |
| DG/DP |
0.3% / 0.3º (APL10% to 90%) |
| H/V Tilt |
Less than 1% |
| K Factor (2T Pulse) |
Less than 1% |
| Crosstalk |
Better than 46 dB |
| Gain Adjust |
±2.5 dB |
| Temperature / Humidity |
0ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
+12 V DC, -12 V DC |
| Consumption |
+12 V DC: 0.3 W, -12 V DC: 0.3 W |
| Dimensions / Weight |
Fit to DF-300A/DF-300 frame / 0.05 kg |
| Accessory |
Operation manual |
*Only 1 x 6 distribution type is available if mounted on DF-300 (previous model) |
