 |
 |
|
1 x 8 Analog Video Distribution Amplifier
UFM-18VDA |
 |
 |
The UFM-18VDA is a module-type analog video distributor that can be installed in the UFM frame. It can distribute one video signal input into eight outputs. They are also equipped with an input signal relay bypass function.
 Analog video distributor for distributing one video signal input into eight outputs.
- Gain control can be made from the front.
- Input signal bypass output function.
- Internal settings can be used to set loop-through for video input.
| Specifications |
|
|
Input
|
Composite: 1.0V(p-p), 75Ω or high-impedance loopthrough, 1ea.
|
| Output |
Composite: 1.0V(p-p) ±0.3dB, 75Ω, 8ea.(7ea. at Input loopthrough), BNC |
| Output Gain Range |
±3.0dB for input signal |
| Output DC offset |
±10mV (at clamp), ±50mV for input signal (at DC couple), OFF clamp, AC couple output |
| Frequency |
100kHz - 12MHz ±0.3dB (100Hz base) |
| K Factor |
Less than 1% |
| DG/DP |
Less than 0.5% / 0.5° (NTSC/PAL) |
| S/N Ratio |
Better than 60dB(p-p/rms) |
| Temperature / Humidity |
0ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption / Draw |
+12VDC - +24VDC ±10% / Approx. 2.9W / +12VDC: Approx. 0.26A, +24VDC: Approx. 0.13A |
| Dimensions / Weight |
106 (W) x 303 (D) mm (Front board),
108.5 (W) x 20 (H) x 66.1 (D) mm (Front board) / Approx. 0.5kg |
| Require Slot |
2 slot |
| Accessories |
Operation manual |
| Option |
UFHM-IFB: SNMP Interface card |
|
