 |
 |
|
1 x 8 or Dual 1 x 4 Analog Audio Distribution Amplifier
UFM-18ADA |
 |
 |
The UFM-18ADA is a module-type analog audio distributor that can be installed in a UFM frame. It can distribute one audio signal input into eight outputs or two inputs into four outputs.
 Audio distributor for distributing one audio signal input into eight outputs or two inputs into four outputs.
Gain adjustment enabled.
| Specifications |
|
|
Audio Input
|
+4dB, balance, 600Ω, 1ea. or 2ea.
|
| Audio Output |
+4dB ±0.2dB, Less than 100Ω, 8ea. or 4ea.
|
| Gain Adjust |
5 step (-8/-4/0/+4/+8dB), ±6dB |
| Max. I/O Level |
Better than +24dB |
| Frequency Response |
20Hz - 20kHz ±0.2dB (1kHz base) |
| Distortion |
Less than 0.05% (when 1kHz, +24dB input) |
| S/N Ratio |
Better than 80dB (when 1kHz, 0dB input, 80kHz-LPF ON) |
| Crosstalk |
Better than 60dB (when 1kHz, 0dB input, 15kHz-LPF ON) |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation)
|
| Power / Consumption / Draw |
+12VDC - +24VDC / 9VA / +12VDC: 760mA, +24VDC: 380mA |
| Dimensions / Weight |
106 (W) x 303 (D) mm (Front board), 108.5 (W) x 66.1 (D) mm (Rear board) / Approx. 0.5kg |
| Require Slot |
1 slot |
| Accessories |
Operation manual |
| Option |
UFHM-IFB: SNMP Interface card |
|
