 |
 |
|
1 x 5 Analog Video Cable Compensator
UFM-15VEA |
 |
 |
The UFM-15VEA is module-type analog video distributor that can be installed in the UFM frame. It can distributes one input into five outputs. A cable compensation function is also included. They are also equipped with an input signal relay bypass function.
 Cable compensation function for supporting cables up to 300 m. (when using 5C-2V)
Gain control and cable compensation settings can be made from the front.
Input signal detection function.
Input signal bypass output function.
Internal settings can be used to set loop-through for video input.
| Specifications |
Video Input |
Analog composite: 1.0Vp-p, 75Ω or loopthorugh, 1ea. BNC |
| Video Output |
Analog composite: 1.0Vp-p, 75Ω, 5ea. (4ea. at Input loopthruogh), BNC |
| Frequency |
100kH - 30MHz ±0.5dB
*Please note that the specifications are changed from 1 July 2009 as shown below (above). |
| DG/DP |
1% / 1° (APL 50%) |
| Gain Range |
±3.0dB for Input signal |
| Cable Compensation |
Max. 300m (When 5C-2V cable) |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption / Draw |
Supply from UF Frame, +12VDC - +24VDC / Approx. 2.5VA (2.5W) / +12VDC: Approx. 0.22A, +24VDC: Approx. 0.11A |
| Dimensions / Weight |
106 (W) x 303 (D) mm (Front board) , 108.5 (W) x 66.1(D) mm (Rear board) / Approx. 0.5kg |
| Require Slot |
1 slot |
| Accessories |
Operation manual |
| Option |
UFHM-IFB: SNMP Interface card |
|
