 |
 |
|
Analog Video Distribution Amplifier (1 x 5)
UFM-15VDA |
 |
 |
The UFM-15VDA is a module-type analog video distributor that can be installed in a UFM frame. It can distribute one video signal input into five outputs. It is also equipped with an input signal relay bypass function.
 |
Analog video distributor for distributing one video signal input into five outputs. |
|
Gain control can be made from the front. |
|
Input signal bypass output function. |
|
Internal settings can be used to set loop-through for video input. |
| Specifications |
|
| Video Input |
Analog composite: 1.0 Vp-p 75Ω or high-impedance loop-through BNC x 1 |
| Video Output |
Analog composite: 1.0 Vp-p ±0.3 dB 75Ω BNC x 5 (4 at Input loop-through) |
| Output Gain Range |
±3 dB for input signal |
| Output DC offset |
±10 mV (at clamp), ±50 mV for input signal (at DC couple), OFF clamp, AC couple output |
| Frequency Response |
100 kHz to 12 MHz ±0.3 dB (100 Hz base) |
| K-factor |
Less than 1% |
| DG/DP |
Less than 0.5% / 0.5º (NTSC/PAL) |
| S/N Ratio |
Better than 60 dB (p-p/rms) |
| Temperature / Humidity |
10ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
Supplied from UFM frame, +12 V DC to +24 V DC ±10% |
| Power Consumption |
2.9 VA (2.9 W), +12 V DC: 0.24 A, +24 V DC: 0.12 A |
| Dimensions |
106 (W) x 303 (D) mm (Front board)
108.5 (W) x 20 (H) x 66.1 (D) mm (Rear board) |
| Weight |
0.5 kg |
| Require Slot |
1 slot |
| Accessories |
Operation manual |
| Option |
UFHM-IFB: SNMP Interface card |
|
