 |
 |
|
Analog Audio Distribution Amplifier (1 x 4 or Dual 1 x 2)
UFM-14ADA |
 |
 |
The UFM-14ADA is a module-type analog audio distributor that can be installed in the UFM frame. It can distribute one audio signal input into four outputs or two inputs into two outputs.
 |
Audio distributor for distributing one audio signal input into four outputs or two inputs into two outputs. |
|
Gain adjustment enabled. |
| Specifications |
|
| Audio Input |
+4 dB balanced 600Ω, 1 ea. or 2 ea. |
| Audio Output |
+4 dB ±0.2 dB 600Ω, 4 ea. or 2 ea. |
| Gain setting / Adjust |
5 step (-8/-4/0/+4/+8 dB) / ±6 dB |
| Output Level |
Better than +18 dB |
| Frequency Response |
20 Hz to 20k Hz ±0.2 dB (1 kHz base) |
| Distortion |
Less than 0.05% (at 1 kHz, +24 dB input) |
| S/N Ratio |
Better than 80 dB (at 1 kHz, 0 dB input, A-weight Filter ON) |
| Temperature / Humidity |
10ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
Supply from UFM frame, +12 V DC to +24 V DC |
| Power Consumption |
7 VA, +12 V DC: 560 mA, +24 V DC: 280 mA |
| Dimensions / Weight |
106 (W) x 303 (D) mm (Front board)
108.5 (W) x 66.1 (D) mm (Rear board) |
| Weight |
0.5 kg |
| Require Slot |
1 slot |
| Accessories |
Operation manual |
| Option |
UFHM-IFB: SNMP Interface card |
|
