 |
 |
|
Analog Frame Synchronizer & TBC
UFM-125TBC |
 |
 |
The UFM-125TBC is a module-type FS/TBC. It corrects time axis distortion and synchronization phases through 10-bit processing.
 |
Analog composite video input/output compatible. (Y/C is also supported.) |
|
Full frame memory to prevent picture field inversion during processing. |
|
10-bit digital decode / encode to ensure stable signals without bit dropout. |
|
4:2:2 component internal signal processing. |
|
Unit-type FA-125 lineup. Compatible with a wide variety of system environments. |
|
Hot-swap function allows boards to be removed and inserted even when the power is on. |
|
Can be mounted on two different frames (casings) --UF-106A, UF-112--according to the system size. |
| Specifications |
|
| Video Format |
NTSC |
| Video Input |
Analog composite: 1.0 Vp-p 75Ω BNC x 1 |
| Y/C Y: 1.0 Vp-p, C: 0.286 Vp-p 75Ω 4-pin S-connector x 1 |
| Genlock Input |
BB: 0.429 Vp-p 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.) |
| Video Output |
Analog composite 1.0 Vp-p 75Ω BNC x 2 |
| Y/C Y: 1.0 Vp-p, C: 0.286 Vp-p 75Ω 4-pin S-connector x 1 |
| Signal Processing |
4:2:2 component |
| Correction Range |
2 fields (field inversion prevented) |
| Sampling Frequency |
Y: 13.5 MHz, C: 6.75 MHz |
| Quantization |
10-bit |
| Frequency Response |
100 kHz to 4.2 MHz: ±0.5 dB, 4.2 MHz to 5.0 MHz: -1.0 dB to 0 dB, roll off above 5.0 MHz |
| S/N Ratio |
56 dB (no quantization noise) |
| DG/DP |
2% / 2º (APL 50%) |
| K-Factor (2T Pulse) |
Less than 1% |
| H/V Tilt |
Less than 1% |
| Residual Jitter |
Y: ±15 ns, C: ±2º |
| Proc Amp |
Video Level: -3 dB to +3 dB / Chroma Level: -3 dB to +3 dB |
| Setup Level: -15 IRE to +15 IRE / Chroma Phase: -30º to +30º |
| Genlock Phase Control |
H Phase: -2 ?s to +2 ?s / SC Phase: -180º to +180º |
| Temperature / Humidity |
10ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
Supplied from UFM frame, +12 V DC to +24 V DC |
| Power Consumption |
17 VA (17 W) |
| Dimensions |
106 (W) x 303 (D) mm (Front board)
106 (W) x 66.1 (D) mm (Rear board) |
| Weight |
0.5 kg |
| Slot Requirement |
1 slot |
| Accessories |
Operation manual |
|
