 |
 |
|
Analog Frame Synchronizer & TBC
UFM-115TBC |
 |
 |
The UFM-115TBC is a module-type FS/TBC that can be installed in the UFM frame. Noise reduction and cable compensation functions are available.
 |
Analog composite 1 input 2 outputs. |
|
Composite Input / Output for easy integration into current available system. |
|
Digital recursive motion adaptive noise reducer for improving the picture quality. |
|
Internal 4:2:2 Component processing and Digital Encoder/Decoder ensure high quality and stable signal output. |
|
Hot-swap function allows boards to be removed and inserted even when the power is on. |
|
Can be mounted on two different frames (casings) --UF-106A, UF-112--according to the system size. |
| Specifications |
|
| Video Formats |
NTSC or PAL (Auto detect) |
| Video Input |
Analog composite: 1.0 Vp-p 75Ω BNC x 1 |
| Genlock Input |
NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.) |
| Video Output |
Analog composite: 1.0 Vp-p 75Ω BNC x 2 |
| Processing |
4:2:2 component |
| Correction Range |
2 fields (field inversion prevented) |
| Sampling Frequency |
Y: 13.5 MHz, C: 6.75 MHz |
| Quantization |
8-bit |
| Frequency Response |
100 kHz - 4.2 MHz: -0.5 dB - +0.5 dB, 4.2 MHz - 5.0 MHz: -1.0 dB - +1.0 dB, roll off above 5.0 MHz (NTSC) |
| 100 kHz - 5.0 MHz: -0.5 dB - +0.5 dB, 5.0 MHz - 5.5 MHz: -1.0 dB - +1.0 dB, roll off above 5.5 MHz (PAL) |
| S/N Ratio |
56dB (no quantization noise) |
| K Factor (2T pulse) |
Less than 2% |
| H/V Tilt |
Less than 1% |
| Residual Jitter |
Y: ±15 ns, C: ±2º |
| Proc Amp |
Video Level: -3 dB to +3 dB
Chroma Level: -3 dB to +3 dB
Setup Level: 0 IRE to +15 IRE
Chroma Phase: -30º to +30º |
| Genlock Phase Control* |
H Phase: -2 ?s to +2 ?s |
| Interfaces |
Remote: BNC x 1 (Freeze control, make contact) |
| Cable Equalization |
0 m to 250 m (5C-2V or equivalent) |
| Temperature / Humidity |
10ºC to 40ºC / 30% to 90% (no condensation) |
| Power / Consumption |
Supplied from UFM frame, +12 V DC ±10 % / 900 mA |
| Dimensions |
106 (W) x 303 (D) mm (Front board)
106 (W) x 66.1 (D) mm (Rear board) |
| Weight |
0.5 kg |
| Slot Requirement |
1 slot |
| Accessories |
Operation manual |
| Require Slots |
1 slot |
*No SC Phase control is available with UFM-115TBC. UFM-125TBC, UFM-128FS or UFM-147DFS is required for SC Phase control.
|
