Tweet

VITS Inserter/Generator
UFM-100VITS

The UFM-100VITS is a module-type VITS inserter that can be installed in the UFM frame. It inserts internally or externally generated test signals or data patterns from line 10 to 23 in the vertical blanking period of the input program signal.

	Consists of an insertion module and signal generation module.
	Internally -generated test signals can be set as program output VITS signals.
	Delete and pass functions available for the same lines as the insert function.
	3 inputs available for external VITS signals.
	Input program signals can be used as through output without conversion.

Specifications
Video Formats	525/60 (NTSC)
Internal Generate Signal	12-bit, 8 fsc (28.6 MHz)
Program Input	Analog composite: 1.0 Vp-p, 75Ω, BNC x 1 (w/ bypass function)
External Input	Analog composite: 1.0 Vp-p, 75Ω, BNC x 3
Program Output	Analog composite: 1.0 Vp-p, 75Ω, BNC x 1 (w/ bypass function)
Program monitor Output	Analog composite: 1.0 Vp-p, 75Ω, BNC x 1
BB Output	Analog composite: 0.429 Vp-p, 75Ω, BNC x 3
Frequency Response	±2% (for up to 5.5 MHz), ±5% (for up to 10 MHz)
Chrominance-to-luminance Gain	Less than 1%
Chrominance-to-luminance Delay	Less than 5 nsec
DG / DP	Less than 0.3% / Less than 0.3º
HV Tilt	Less than 1%
DC Output Level	0 V ±10 mV
S/N Ratio	Better than 60 dB
I/O Delay	11.3º (±1º), Approx. 8.8 nsec
Temperature / Humidity	10ºC to 40ºC / 30% to 90% (no condensation)
Power	+12 V DC to +24 V DC ±10%
Power Consumption	7.1 W, +12 V DC: 590 mA, +24 V DC: 300 mA
Dimensions	106 (W) x 303 (D) mm (Front board) 108.5 (W) x 66.1 (D) mm (Rear board)
Weight	1.0 kg (2 module total)
Require Slot	2 slots
Accessories	Operation manual