The UFM-100MV is a module-type multi-viewer that can be installed in the UFM frame. It divides the screen into sections for displaying four SD-SDI input signals. It comes with many different information display functions including title display, audio level meter display and tally display.
 4 SD-SDI inputs and 2 outputs (asynchronous input supported)
Title display function
Audio level meter display function (for displaying the levels of up to 4 channels)
Reference input function (signals supplied from UF frame) (option)
Parallel control (screen display switching, tally input) (option)
Serial control (screen display switching, title display ON/OFF, audio level display ON/OFF) (option)
| Specifications |
| Standard |
525/60 (NTSC) or 625/50 (PAL) (selectable at menu) |
| Signal Processing |
4:2:2 component |
| Quantization |
10-bit |
| Sampling Frequency |
Y: 13.5MHz, C: 6.75MHz |
Video Input |
SD SDI: 270Mbps, 75Ω, 4ea., BNC (no loopthrough) |
Reference Input (Option) |
BB: 0.429Vp-p (NTSC) / 0.45Vp-p (PAL) (Input through UF frame) |
Video Output |
SD SDI: 270Mbps, 75Ω, 2ea., BNC |
| Interfaces (Option) |
Required UFM-100MVIF option |
| REMOTE: 1ea., 25-pin D-sub (female), Input terminal: TTL negative logic pulse or make contact pulse, Output terminal: Open corrector negative logic pulse |
| RS-232C/RS-422 (Selectable): 1ea., 9-pin D-sub (male) |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption / Draw |
Supply from UFM Frame, +12VDC - +24VDC / +12VDC: 12.0W, +24VDC: 12.5W / +12VDC: 1.0A, +24VDC: 0.52A |
| Dimensions / Weight |
106 (W) x 303 (D) mm (Front board), 108.5 (W) x 66.1 (D) mm (Rear board) / Approx. 1.0kg (Except for Expansion board) |
| Require Slot |
1 slot (2 slot: when Expansion board added) |
| Accessories |
Operation manual |
| Option |
UFM-100MVGL: Genlock input option
UFM-100MVIF: Parallel/Serial Interface option |
|
