FOR-A COMPANY LIMITED
Home Products About us News&Event Where to buy Contact
Product List by Category Product index Product Demonstration
Overview and Specifications
Appearance (Front, Back)
Downloads Catalog (PDF)
Download User Manuals (PDF)
Product Inquiry
Technical Question
 
Back
Site Search
Search
Search for all Products Search
Digital Color Corrector
UFM-100DCC

This is a modular type of color corrector that can be installed in a UF frame. It supports analog composite or SD-SDI input and output signals. A broad spectrum of functions ranging from the color correction of signals to various clip functions are available.


Analog composite or SD-SDI input and output signals supported
A-to-D or D-to-A conversion function also available
Varied color correction functions (Balanced, Differential and Sepia modes)
Process amplifier functions provided (video level, chroma level, chroma phase, setup level)
Gamma adjustment functions (independent adjustment of G, B and R signals, high/mid/dark tone adjustment)
Function for dividing the screen into sections to make it easier to compare and check the images before and after correction
Control of up to four units enabled using the DCC-OU remote control unit (option)
* The DCC-OU is required to control the parameters.


Specifications
Standard 525/60 (NTSC), 625/50 (PAL) (Auto detect)
Video Input Analog composite: 1.0Vp-p or SD-SDI: 270Mbps, 75Ω, 1ea., BNC
Video Output Analog composite: 1.0Vp-p or SD-SDI: 270Mbps, 75Ω, 2ea., BNC
Process Control Video Level: 50% - 150%*1
Y Level: 50% - 150%*1
C Level: 50% - 150%*1
HUE: -30° - +30°*1
Setup Level: -15% - +15%*1
Y White Clip: 50% - 109%*1
C White Clip: 50% - 111%*1
Y Black Clip: -7% - 109%
Color Correction BAL: GBR adjust*1
DIF: Color adjust*1
SEPIA: Chroma level HUE adjust*1
White Level (GBR): 50% - 150% (for Input signal)*1
Black Level (GBR): 50% - 150% (for Input signal)*1
Gamma Level (GBR): 75% - 125% (for Input signal)*1
Interface REMOTE: RS-422, 1ea., 9-pin D-sub (male)
Temperature / Humidity 10ºC - 40ºC / 30% - 90% (no condensation)
Power / Consumption / Draw Supply from UF frame, +12VDC - +24VDC / 12W / +12VDC: 1.0A, +24VDC: 0.5A
Dimensions / Weight 106 (W) x 303 (D) mm (Front board), 108.5 (W) x 83.3 (D) mm (Rear board) / Approx. 0.5kg
Require Slot 2 slot
Accessories Operation manual
Option DCC-OU: Remote control unit
*1: All parameters can be set only DCC-OU (option).
Page Top
Sitemap Japan Korea Espanol Privacy pollcy All Right Reserved. Copyright FOR-A COMPANY LIMITED.2006