 |
 |
|
SNMP Remote Control Module
UFM-100CTL / UFM-100NET |
 |
 |
These modules are a control module that can be installed on the UFM frame and an SNMP-compatible network module. The UFM-100CTL is a control module that enables the external control of the various modules installed in the frame. The UFM-100NET is a network module that enables the monitoring of networks that are compliant with SNMP standards. Installing these modules makes the UFH series even more versatile and user-friendly.
 UFM-100CTL: A control module equipped with many different interfaces.
- RS-232C/422: Compatible with external control of various modules.
- CONTROL: Can be connected to FOR-AÅfs remote control units.
- Ethernet: Compatible with network monitoring and setup (UFM-100NET is required).
UFM-100NET: An SNMP network module that enables remote monitoring and setup.
- Enables SNMP-compatible monitoring and control when installed on the UFM-100CTL.
- Enables the status and settings of each module to be checked and controlled via a network.
- Equipped with an e-mail notification function that sends a warning to the administrator if there is a problem in a module.
- Ethernet: A port for maintenance is provided. It can be accessed from the front panel without affecting the connection environment.
* Modules that are not compatible with SNMP are not supported.
UFM-100CTL
| Specifications |
|
| Interface |
RS-232C/422: D-sub 9-pin (male), 1 line (for control of various modules) |
| CONTROL: BNC, 2 lines (IN/OUT) can be connected in a cascade |
| Ethernet: 10/100Base-T, RJ-45, 1 line (UFM-100NET is required) |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption / Draw |
Supply from UFH frame, DC+12 V - +24 V / Approx. 15W / 0.63A |
| Dimensions / Weight |
106 (W) x 303 (D) mm (front) / 108.5 (W) x 66.1 (D) mm (rear) / Approx. 0.5kg |
| Require Slot |
1 slot |
| Accessories |
Operation manual |
UFM-100NET
| Specifications |
|
| Interface |
Ethernet: 10/100Base-T, RJ-45, 1 line (for maintenance) |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption / Draw |
Operates on the UFM-100CTL / Approx. 15W / 0.63A |
| Dimensions / Weight |
53 (W) x 110 (D) mm / Approx. 0.1kg |
| Require Slot |
Installed on the UFM-100CTL |
| Accessories |
Operation manual |
* This device cannot be used by itself. It must be used in combination with the UFH-100CTL.
|
