|
The UFM-100ADC is a module-type AD converter that can be installed in a UFM frame. Analog composite, Y/C, and analog component input can be converted to SD SDI for output.
 Includes analog composite, Y/C, and analog component input.
Two SD SDI outputs.
Adjustment of luminance level, chroma level, and chroma phase.
Reference signals can be input from a UFM frame or rear module.
| Specifications |
|
| Standard |
NTSC (525/60) & PAL (625/50) (Auto detect)
|
| Video Input |
Selectable as below |
| Analog Composite |
1.0Vp-p, 75Ω, 1ea., BNC |
| Y/C |
Y: 1.0Vp-p, C: 0.286Vp-p (NTSC) / 0.3Vp-p (PAL), 75Ω, 1ea., BNC |
| Analog Component |
Y: 1.0Vp-p, R-Y/B-Y: 0.7Vp-p, 75Ω, 1ea., BNC (Selectable as Betacam level or SMPTE/EBU level)
|
| Genlock Input* |
BB: 0.429Vp-p (NTSC)/0.45Vp-p (PAL), 75Ω, 1ea, BNC (Also signal input from UFM Frame) |
| Video Output |
Digital Component:: 270Mbps, 75Ω, 2ea., BNC |
| Quantization |
9-bit |
| Sampling Frequency |
Y: 13.5MHz, C: 6.75MHz |
| I/O Delay |
Max. 1 frame |
| Frequency Response |
100kHz - 5MHz: ±0.3dB, roll off above 5MHz (NTSC)
100kHz - 5.5MHz: ±0.3dB, roll off above 5.5MHz (PAL)
|
| S/N Ratio |
Over 54dB (Composite) |
| Linearity |
1.5% |
| K-Factor (2T pulse) |
1% |
| Process Control |
Video Level: -50% - +50%
Chroma Level: -50% - +50%
Chroma Phase: -30° - +30° |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption / Draw |
Supply from UF frame, +12VDC - +24VDC / Approx. 3.6W / +12VDC: Approx. 0.3A, +24VDC: Approx. 0.15A |
| Dimensions / Weight |
Fit to UF Frame, 106 (W) x 303 (D) mm (Front board), 18.5 (W) x 66.1 (D) mm (Rear board) / Approx. 0.5kg |
| Require Slot |
1 slot |
| Accessories |
Operation manual
|
*Can not adjust Genlock phase.
*Can not operate minimum delay and fixed delay mode.
|
