HD/SD Down Converter UFH-70DCM

This is a down-converter used for monitoring applications and is available in a modular format for installation in a UFH frame. It can convert HD-SDI signals into SD-SDI signals and analog signals or convert SD-SDI signals into analog signals.

Down-conversion of HD-SDI signals into SD-SDI signals and analog signals (HD or SD)
Conversion into any of five aspect ratios (4:3, 13:9, 14:9, 16:9, squeeze)
Selection of analog signal output enabled (YPBPR, GBR, Y/C, composite signals)
Sync output signals for monitoring supported
Proc Amp functions provided (video level, chroma level, chroma phase, setup/black level)
Built-in cross color reduction circuit
Selection of enhanced level enabled

Specifications
Video Format	HD: 1080/59.94i, 50i, 720/59.94p, 50p
	SD: 525/60 (NTSC), 625/50 (PAL)
Video Input	HD/SD-SDI: 1.5 Gbps/270 Mbps 75Ω BNC x 1
Video Output	HD/SD-SDI: 1.5 Gbps/270 Mbps 75Ω BNC x 1 (Active through)
	SD-SDI: 270 Mbps 75Ω BNC x 2
	Analog: 75Ω BNC x 4 (Select from the following signals:) -YPBPR (HD/SD): Y: 1.0 Vp-p, PBPR or B-Y/R-Y: 0.7 Vp-p -GBR (HD/SD): 1.0 Vp-p (If Sync is added.) -Y/C: Y: 1.0 Vp-p, C: 0.682 Vp-p -Composite: 1.0 Vp-p -Bi-level sync: 0.3 Vp-p -Tri-level sync: 0.6 Vp-p
Quantization	Y: 10-bit, C: 10-bit
Sampling Frequency	HD-SDI Y: 74.25/1.001 MHz or 74.25 MHz, C: 37.125/1.001 MHz or 37.125 MHz
	SD-SDI Y: 13.5 MHz, C: 6.75 MHz
I/O Delay	HD-SDI(1080i) input / SD output: Minimum delay (approx. 90 lines) or One-frame delay
	HD-SDI(720p) input / SD output: Minimum delay (approx. 120 lines) or One-frame delay
	SD-SDI input / output: Approx. 3 μs
Process Amp	Video Level: Over ±3 dB Chroma Level: Over ±3 dB HUE: ±30º Setup / Black Level: ±15 IRE
Temperature / Humidity	0ºC to 40ºC / 30% to 90% (no condensation)
Power	Supplied from UFH Frame, +24 V DC
Power Consumption	9.6 VA (9.6 W), 400 mA
Dimensions	138.5 (W) x 400 (D) mm (Front board) 141 (W) x 101 (D) mm (Rear board)
Weight	1.0 kg
Require Slot	1 slot
Accessories	Operation manual