HD/SD DA Converter UFH-70DAC

Conversion of HD-SDI and SD-SDI signals into analog signals
Selection of analog signal output enabled (YPBPR, GBR, Y/C, composite signals)
Sync output signals for monitoring supported
Proc Amp controls provided (video level, chroma level, chroma phase, setup/black level)

Specifications
Video Formats	HD-SDI: 1080/59.94i, 720/59.94p, 1080/50i, 720/50p, 1080/60i, 720/60p, 1035/59.94i, 1035/60i
	SD-SDI: 525/60, 625/50
Video Input	HD/SD-SDI: 1.5 Gbps / 270 Mbps, 75Ω, BNC x 1
Video Output	HD/SD-SDI: 1.5 Gbps / 270 Mbps, 75Ω, BNC x 1 (active through)
	Analog: 75Ω, BNC x 4 (refer to below) - YPBPR (HD/SD) Y:1.0 Vp-p, PBPR or B-Y/R-Y: 0.7 Vp-p - GBR(HD/SD) 1.0 Vp-p (with sync) - Y/C Y: 1.0 Vp-p, C: 0.682 Vp-p - Composite 1.0 Vp-p - Bi-level sync 0.3 Vp-p - Tri-level sync 0.6 Vp-p
Quantization	Y: 10-bit, C: 10-bit
I/O Delay	HD-SDI: approx. 500 ns SD-SDI: approx. 3 μs
Sampling Frequency	HD-SDI: Y: 74.25/1.001 MHz, C: 37.125/1.001 MHz
	SD-SDI: Y:13.5 MHz, C: 6.75 MHz
Process Amp	Video Level: Over ±3 dB Chroma Level: Over ±3 dB Hue: ±30° Setup / Black Level: ±15 IRE
Temperature / Humidity	10ºC to 40ºC / 30% to 90% (no condensation)
Power	Supplied from UFH Frame, +24 V DC
Power Consumption	6.5 VA (6.5 W)
Dimensions	138.5 (W) x 400 (D) mm (Front module) 141 (W) x 101 (D) mm (Rear module)
Weight	1.0 kg
Require Slot	1 slot
Consumables	No consumables

< Analog Output Details >

Input Signal		Analog Output Signal
HD/SD-SDI IN		ANALOG OUT 1	ANALOG OUT 2	ANALOG OUT 3	ANALOG OUT 4
SD-SDI	1	Y (SD)	B-Y (SD)	R-Y (SD)	Composite (SD)
	2	Y (SD)	B-Y (SD)	R-Y (SD)	Sync (SD)
	3	G (SD)	B (SD)	R (SD)	Composite (SD)
	4	G (SD)	B (SD)	R (SD)	Sync (SD)
	5	Composite (SD)	Y (SD)	C (SD)	Composite (SD)
	6	B.B. (SD)	Y (SD)	C (SD)	Sync (SD)
	7	Composite (SD)	Composite (SD)	Composite (SD)	Composite (SD)
HD-SDI	1	Y (HD)	PB (HD)	PR (HD)	Sync (HD)
	2	G (HD)	B (HD)	R (HD)	Sync (HD)