 |
 |
|
UFH Frame (8 Modules)
UFH-108A |
 |
 |
UFH frame with outstanding reliability and maintainability, supporting the installation of up to 8-modules in the UFH series.
 |
Up to 8-modules in the UFH series can be installed. |
|
Installation of redundant power supply supported (option). |
|
Hot swapping for power supply and modules supported. |
|
The front boards can be easily replaced from the front of the unit, even without disconnecting the rear board cables. |
|
Alarm detection and status displays are indicated by front panel LEDs and the alarms can be output to an external device. |
|
Loopthrough connectors are provided as Genlock inputs, and the input signals can be distributed to all the modules. |
| Specifications |
|
| Installable Modules |
UFH series: Max. 8 modules (UFM series modules are also installable using the expansion kit.)
The number of maximum installable modules varies depending on the power consumption of installable modules. |
Genlock In |
BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.), Tri-level sync: 0.6 Vp-p
The genlock signal can be distributed to all the modules within the frame. |
| Interfaces |
Alarm Output: 15-pin D-sub (female) x 1 (power supply error, fan error, temperature error) |
| Temperature / Humidity |
10ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
100 V AC to 240 V AC, ±10%, 50/60 Hz |
| Power Consumption |
350 VA (346 W) at 100 V AC, +24 V DC, 9.6 A |
| Dimensions / Weight |
430 (W) x 88 (H) x 500 (D) mm, EIA 2 RU / 12.0 kg (including one Power supply unit) |
| Accessories |
Operation manual, AC cord, Rack mount bracket |
| Options |
UFH-108APS: Power supply unit (for Redundant) |
|
