UFM Frame (6 Modules)
UF-106B

The UF-106B is a UFM frame with superior reliability and maintainability. It can hold up to 6 UFM modules.

Holds up to six UFM modules and provides high universality in a compact, EIA 1 RU size design.
Allows installation of redundant power supply UF-106BPS. (When the UF-106BPS is installed, a maximum of four modules can be installed.)
Supports hot-swapping of power supply and installed modules.
Boards are easily replaced from the front side without removing rear cables.
LED Alarm sensors and status indicators are displayed on the front panel. Alarms can be output to external devices.
Includes genlock input for distributing genlock signals to all installed modules.
Control card is used for remote control interface. (Optional)

Specifications
Installable Modules	Max. 6 modules (Max. 4 when using redundant power option, UF-106APS)
Genlock In	BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.)
Interfaces	Alarm Output: 15-pin D-sub (female) x 1 (power and, fan alarm)
Temperature / Humidity	0ºC to 40ºC / 30% to 90% (no condensation)
Power	100 V AC to 240 V AC ±10%, 50/60 Hz
Consumption	160 VA (155 W) at 100 V AC
Power Consumption	+24 V DC, 4.9 A
Dimensions / Weight	482 (W) x 44 (H) x 364.5 (D) mm / 6.2 kg (including one power supply unit)
Accessories	Operation manual, AC cord
Options	UF-106BPS: Power supply module (for Redundant) UFM-30CTL: Control card

Materials

• Operation manual[PDF:391.7KB]