|
 |
 |
|
High Resolution Quad Viewer
MV-400 |
 |
 |
With the MV-400 Multi Viewer, you can monitor up to four channels of camera video with a single monitor. In addition to regular video output, the MV-400 also features high-definition monitoring in SXGA and remote monitoring over a network.
 Features 2 and 4 split-screen modes
Up to four asynchronous composite signal (color, B/W) inputs
In addition to regular video output, supports SXGA high-definition output and video transmission over a network
In SXGA high-definition output, video for each channel can be displayed with virtually no reduction in size
Title display (up to 8 alphanumeric characters per channel)
Includes parallel remote input terminal
Allows remote control over a network even when high-definition output is selected(An additional option is required for using simultaneous a high definition and video transmission mode use.)
Video sensor option for motion detection
User ID and password security
A remote monitoring system is available using FOR-A's network multiviewer
Multicast function for monitoring on multiple computers is supported by the MV-40EX option.
| Specifications |
|
| Video Formats |
NTSC or PAL (Auto detect) |
| Video Input |
Analog Composite: Color or B/W, 1.0 Vp-p, 75Ω or loop-through (auto termination), BNC x 4 |
| Video Output |
Analog Composite 1: 1.0 Vp-p ±0.1V, 75Ω, BNC, Screen Display: Full / 2-split / Quad split |
| Analog Composite 2: 1.0 Vp-p ±0.1V, 75Ω, BNC, Screen Display: fixed quad split |
RGB: 0.7 Vp-p ±0.1 V, 75Ω, 15-pin D-sub (female) x 1
(An additional option is required for using simultaneously a high definition mode and video transmission mode.)
Resolution: SXGA (1280 x 1024 pixels) *The video area is 1280 x 960 pixels.
Screen Display: Full / 2-split / Quad split |
| Interfaces |
LAN: 100BASE-TX, RJ-45
*Following or higher spec. PC is recommended for video transmission.
CPU: Better than Intel Pentium4 3 GHz, Built in memory: Better than 512 MB |
RS-232C: 25-pin D-sub (female) Asynchronous, Full duplex,
Transmission speed: 9600 bps, Data length: 8-bit, Stop bit: 1-bit, Parity: None |
REMOTE: 25-pin D-sub (female)
TTL negative logic or make contact input, Pulse width: 100 ms or more |
| Character Display |
Camera Title: 8 characters/1 Line max.
(alphanumeric characters, symbols and Japanese Kana available) |
| Data Backup |
Saved to EEPROM |
| Temperature / Humidity |
0ºC to 40ºC / 30% to 90% (no condensation) |
| Power |
100 V AC - 240 V AC ±10%, 50/60 Hz |
| Consumption |
18 VA (13 W) at 100 V AC, 24 VA (14 W) at 200 V AC |
| Dimensions / Weight |
212 (W) x 44 (H) x 350 (D) mm EIA1RU half size / 3.0 kg |
| Accessories |
Operation manual, AC cord, Remote control software (for Windows) |
| Option |
Single mount or dual mount rack brackets
MV-40EX: Expansion option
MV-40SEN: Sensor option |
|
