Analog Video High Resolution Multi Viewer (16-Split) MV-1600

Input of up to 16 asynchronous composite signals (color, B/W)
Loop-through input terminals support system expansion
2 analog composite outputs: Full screen, 4-split screen, or 16-split screen can be displayed.
SXGA (1280 x 1024) high-resolution output: Full screen, 4-split screen, 9-split screen*1, or 16-split screen is available.
Network video transfer function: Monitoring video can be transferred over network at a maximum transfer rate of 60 fps*2
Title display function: Up to 8 characters per channel (up to 6 characters in composite output) (alphanumeric characters, symbols)
Automatic switching function: Enables automatic switching between full screen and split-screen displays
External alarm input/output terminal: Enables alarm-linked display
Includes dedicated software package enabling viewer functions and settings and control over a LAN connection
Enables control using a parallel remote connection and RS-232C interface
Security system with ID and password incorporated
Multicast mode allows each PC to control images remotely.
*1: The screen size for each channel in 9-split screen is identical to the size for the 16-split screen.
*2: Factors such as the transferred video, JPEG compression rate, connected PC, and/or network environment way not allow the 60 fps maximum transfer rate to be attained.

Specifications
Video Format	NTSC or PAL (Auto detect)
Video Input	Analog composite: 1.0 Vp-p (Color or B/W), 75Ω or loopthrough (auto termination), BNC (asynchronous supported), 16 inputs
Video Output
VGA OUT	15-pin D-sub (female), x 1 Resolution: 1280 x 1024 pixels (SXGA) *Video area: 1280 x 960 pixels Horizontal scanning frequency: 64.0 kHz Vertical scanning frequency: 60.0 Hz Video signal: 0.7 Vp-p ±0.1V, 75Ω Reference signal: Separate HV sync (TTL positive logic pulse, level signal) Screen display: Selectable from full, 4-split screen, 9-split screen, and 16-split screen *If the SXGA output function and video transfer functions are used at the same time, the frame rate will be half the frame rate when SXGA output only is selected.
VIDEO OUT	Analog composite: 1.0 Vp-p ±0.1 V, 75Ω, BNC, 2 outputs Screen display: Selectable from full screen, 4-split screen, and 16-split screen *Changing a screen display will change all SXGA output, VIDEO output and LAN transfer screens. *If 9-split screen is selected, the 9-split screen is shown from SXGA output, and the VIDEO output and LAN video transfer screen show the 16-split screen.
Interfaces	Remote Input: Remote control/Alarm input shared connector, 25-pin D-sub (female) TTL negative logic pulse or make-contact input, pulse width: 100 ms or more Control: AUTO/RESET, Camera 1-16 selection, SPLIT4/9/16 selection *This cannot be used when alarm control is selected.
	Alarm Input: Remote control/Alarm input shared connector, 25-pin D-sub (female) TTL negative logic pulse, level signal, or make-contact Pulse width: 100 ms or more (at TRIG setting), 16 inputs *This cannot be used when remote control is selected.
	RS-232C: External control/Alarm input shared connector, 25-pin D-sub (female) Asynchronous, full duplex, baud rate: 9600 bps, data length: 8-bit, stop bit: 1-bit, parity: none Control: Video output selection and menu settings
	LAN: 10BASE-T/100BASE-TX, RJ-45 (Category 5 support) x 1 Control: Video output selection and menu settings Video transfer: Max. frame rate: 60 fps, Image compression type: JPEG Transfer screens: Selectable from full screen, 4-split screen, and 16-split screen Image size: Selectable from SXGA (1280 x 960 pixels) and VGA (640 x 480 pixels) *The maximum frame rate varies depending on the operating environment. *If the SXGA output and video transfer functions are used at the same time, the frame rate will be slower than the frame rate when the video transfer function only is selected.
Characters Display
Camera Title	SXGA output / LAN video transfer: 1 line x 8 characters Alphanumeric characters, symbols VIDEO output: 1 line x 6 characters Alphanumeric characters, symbols
Alarm Display	Automatic switching to alarm screen SXGA output: Tally frame display, letter "A" display VIDEO output / LAN video transfer: Letter "A" display
Video Loss Display	Automatic switching to video loss screen SXGA output: Tally frame screen, letter "L" display VIDEO output / LAN video transfer: Letter "L" display
Data Backup	Menu settings are stored to EEPROM
Power	100 V AC to 240 V AC ±10%, 50/60 Hz
Consumption	28 VA (27 W) at 100 V AC, 33 VA (26 W) at 200 V AC
Temperature/Humidity	0ºC to 40ºC / 30% to 90% (no condensation)
Dimensions/Weight	424 (W) x 44 (H) x 350 (D) mm / 4.5 kg
Accessories	Operation manual, AC cord, Rack mount brackets, Control Software
System Requirement for Control Software	OS: Windows 2000 Professional SP4 or later, Windows XP SP2 or later
Operating Environment	Recommended PC specifications: CPU Intel Pentium 4 3.0 GHz or faster, RAM 1 GB or more, LAN port required