|
|
 |
 |
|
DA Converter
MightyCoder d/a |
 |
 |
MightyCoder d/a Compact serial digital component to analog converter which is a cost saving answer to integrating existing analog monitors in facilities switching over to digital support. MightyCoder power supply frame and module options also let up to 20 converters be connected to, and powered by, a single EIA 1RU frame.
 Accepts 1 ea. serial digital component input.
Outputs composite, component, and reclocked serial digital (input) simultaneously.
Selectable digital filters and built-in color bar generator.
Signal presence and power indications.
Sized small enough to fit in almost any space.
Attention: The input signals below don't convert into correct output signals.
Digital component signals corresponding to 8ch embedded audio signals.
Digital component signals which embedded audio corresponds to 24-bit resolution
Digital component signals come out from IMX (SONY).
| Specifications |
| Standard |
NTSC, PAL, or PAL - M (selectable by Internal dip switch) |
| Inputs |
Digital component: 270Mbps, 75Ω, 1ea., BNC (w/ 2ea., active loopthrough) |
| Outputs |
Selectable as below |
| Analog composite |
1.0Vp-p, 75Ω, BNC |
| Y/C |
Y: 1.0Vp-p, C: 0.286Vp-p (NTSC) / 0.3Vp-p (PAL), 75Ω, 1ea., BNC |
| GBR |
G/B/R: 1.0Vp-p (0.7/0.3) (Selectable sync ON/OFF), 75Ω, 1ea., BNC |
| YUV |
Y: 1.0Vp-p, U/V: 0.7Vp-p (BETACAM level), 75Ω, 1ea., BNC |
| DG / DP |
1.5% / 1.5¼ (composite), 2.0% /2.0¼ (component) |
| S/N Ratio |
Better than 52dB |
| Output DC Blanking Level |
334mV typical (composite), 668mV typical (component Pb /Ph) |
| Chroma to Luma Delay Inequality |
10ns typical |
| Filter Response |
(-3dB bandwidth) |
| Low Pass |
Y: 4.2MHz, C: 2.05MHz -3dB |
| Notch |
Y: 2.1MHz, C: 2.05MHz -3dB |
| High Band |
Y: 5.6MHz, C: 2.05MHz -3dB |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power / Consumption |
6VDC / Approx. 4VA |
| Dimensions |
115 (W) x 32 (H) x 76 (D) mm |
| Weight |
Approx. 0.25kg (w/o power supply) |
| Accessories |
Operation manual , AC cord |
| Options |
MC-PS-FR: Power module frame. Accepts up to 4 modules (MC-PS-5).
MC-PS-5: Power module. Powers up to 5 MightyCoders. |
|
