| Specifications |
|
| Video Formats |
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p (select at menu) |
SD: 525/60, 625/50 (select at menu) |
| Removable Storage Device |
LTO-5 (File system: IBM LTFS) |
| Supported MXF Format |
OP-1a (SMPTE RDD-9) |
HD: MPEG-2 Long GOP
-50 Mbps (CBR/4:2:2/422P@HL) Audio: 24-bit, 8 ch
-35 Mbps (VBR/4:2:0/MP@HL) Audio: 16-bit, 4 ch
-25 Mbps (CBR/4:2:0/MP@H14) Audio: 16-bit, 4 ch
-18 Mbps (VBR/4:2:0/MP@HL) Audio: 16-bit, 4 ch
|
SD MPEG-2 1GOP (I-frame only)
-50/40/30 Mbps (4:2:2/422P @ML) Audio: 16-bit, 8 ch
|
| Video Input |
HD-SDI: 1.5 Gbps, 75Ω BNC x 1 |
SD-SDI: 270 Mbps, 75Ω BNC x 1 |
| Genlock Input |
BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p or Tri-level sync: 0.6 Vp-p,75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused) |
BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused) |
| Video Output |
HD-SDI: 1.5 Gbps, 75Ω BNC x 4 (Output 3 and 4 support timecode display) |
SD-SDI: 270 Mbps, 75Ω BNC x 4 (Output 3 and 4 support timecode display) |
| Audio Input |
The maximum number of output channels varies by MXF format and bitrate. |
| Embedded |
Max. 8 ch (4 stereo pairs) (Group 1 and 2) 48 kHz, synchronous only |
| AES/EBU |
1.0 Vp-p, unbalanced, 75Ω, BNC x 2 (2 stereo pairs), 16/20/24-bit, 48 kHz |
1.0 Vp-p, unbalanced, 75Ω, BNC x 2 (2 stereo pairs), 16/20-bit, 48 kHz |
| Audio Output |
The maximum number of output channels varies by MXF format and bitrate. |
| Embedded |
Max. 8 ch (4 stereo pairs) (Group 1 and 2) 48 kHz, synchronous only |
| AES/EBU |
1.0 Vp-p, unbalanced, 75Ω, BNC x 2 (2 stereo pairs), 16/20/24-bit, 48 kHz |
1.0 Vp-p, unbalanced, 75Ω, BNC x 2 (2 stereo pairs), 16/20-bit, 48 kHz |
| Time Code Input |
|
| Embedded |
Ancillary timecode |
| LTC |
1.0 Vp-p, unbalanced, 75Ω, BNC x 1 |
| Time Code Output |
|
Embedded |
Ancillary timecode |
| LTC |
1.0 Vp-p, unbalanced, 75Ω, BNC x 1 |
| Recording Time |
Minimum / file: 1 second
Maximum / file: 24 hours |
Internal Storage |
2 TB HDD |
| Interfaces |
RS-422: 9-pin D-sub (female) x 1 (inch screws) (for external VTR control on encoding) |
| USB: USB 2.0 Series A connector x 3 (front x 1, rear x 2) (for keyboard and barcode scanner) |
| LAN1/2: 100BASE-TX/1000BASE-T, RJ-45 x 2 |
| To External Drive: Mini-SAS x 1 (for External drive. Optional software is necessary. This is planned in the future.) |
GPI/ALARM: 15-pin D-sub (female) x 1
ALARM: Power, Fan alarm (relay contact) /
GPI: 3-input/3-output (contact input, open collector output)
|
| MAINTENANCE: 15-pin mini D-sub (female) (VGA) x 1 (maintenance only) |
| Temperature / Humidity |
10ºC to 40ºC / 20% to 80% (no condensation) |
| Power |
100 V AC to 240 V AC ±10%, 50/60 Hz |
| Consumption |
150 VA (145 W) at 100 V AC to 120 V AC, 132 VA (120 W) at 220 V AC to 240 V AC |
| Dimensions / Weight |
212 (W) x 130 (H) x 533.5 (D) mm EIA 3 RU half size / 10 kg |
| Consumables (if used 24 hours a day at room temperature) |
Cooling fan: Replace every 3 years.
Power: Replace every 5 years.
Battery: Replace every 5 years.
Hard disk drive: Replace every 5 years.
|
| Accessories |
Operation manual, AC Cord, Control software (Installed) |
| Options |
USB keyboard, USB barcode scanner, LTO cleaning tape, 1 year warranty |
