 |
 |
|
digiStorm Controller
DSC-200 |
 |
 |
The DSC-200 is a device for switching camera parameters in FOR-A's "digiStorm" virtual studio and RCG system. Normally, one CG processor is required for each camera for compositing with CG images. The DSC-200, however, enables switching of the input camera parameters for effectively using the CG processor.
 Supports building of multi-camera sensor systems: The camera parameters needed for CG compositing are changed at the stage before the CG processor for effectively using the CG processor when operating a multiple-camera virtual studio system and for eliminating the need for a CG processor for each camera.
Two available lines for camera parameter output setting: Separate camera settings can be made for each line for building an on-air/next system when two CG processors are used.
16-port RS-422 interface: This collects the various data needed for the virtual studio, including the camera sensors, for eliminating complicated data handling processes.
Enables linked operation with the Digital Video Switcher HANABI series: The DCS-200 operates in tandem with the switching settings of the video switcher for providing seamless compositing of the appropriate CG image on the camera video.
Easy-to-operate, intuitive GUI: Settings can be easily made on a PC.
Built-in redundant power supply
| Specifications (Preliminary) |
|
| Genlock Input |
BB: NTSC: 0.429 Vp-p/PAL: 0.45Vp-p or tri-level sync: ±0.3Vp-p, 75Ω or loopthrough, BNC, 1 input |
| Interfaces |
RS-422: D-sub 9-pin (female), 8 ports |
| RS-232C: D-sub 9-pin (male), 1 port (for maintenance) |
| LAN: 10Base-T/100Base-TX, RJ-45, 1 port (not compatible with DHCP) |
| GPI: D-sub 37-pin (female), 1 port (16-input/16-output) |
| Temperature / Humidity |
10ºC - 40ºC / 30% - 90% (no condensation) |
| Power |
100VAC - 240VAC 10% ±50/60Hz |
| Consumption |
20VA (17W) at 100VAC, 43VA (17W) at 200VAC |
| Dimensions / Weight |
430 (W) x 88 (H) x 475 (D) mm / 9kg |
| Accessories |
Operation manual, AC cord, Rack mount brackets |
|
