Digital Color Corrector DCC-100

Analog composite or SD-SDI input and output signals supported
A-to-D or D-to-A conversion function also available
Varied color correction functions (Balanced, Differential and Sepia modes)
Proc Amp functions provided (video level, chroma level, chroma phase, setup level)
Gamma adjustment functions (independent adjustment of G, B and R signals, high/mid/dark tone adjustment)
Function for dividing the screen into sections to make it easier to compare and check the images before and after correction
Control of up to four units enabled using the DCC-OU remote control unit (option)

Specifications
Standard	525/60 (NTSC), 625/50 (PAL) (Auto detect)
Video Input	Analog composite: 1.0Vp-p, 75Ω , 1ea., BNC
	SD SDI: 270Mbps, 75Ω , 1ea., BNC
Video Output	Analog composite: 1.0Vp-p, 75Ω , 2ea., BNC
	SD SDI: 270Mbps, 75Ω, 2ea., BNC
Process Control	Video Level: 50% - 150% *
	Y Level: 50% - 150% *
	C Level: 50% - 150% *
	HUE: -30º - +30º *
	Setup Level: -15% - +15% *
	Y White Clip: 50% - 109% *
	C White Clip: 50% - 111% *
	Y Black Clip: -7% - 50% *
Color Correction	BAL: GBR adjust *
	DIF: Color adjust *
	SEPIA: Chroma level HUE adjust*
	White Level (GBR): 50% - 150% * (for Input signal)
	Black Level (GBR): 50% - 150% * (for Input signal)
	Gamma Level (GBR): 75% - 125% * (for Input signal)
Interfaces	REMOTE: RS-422, 1ea., 9-pin D-sub (male)
Temperature / Humidity	10ºC - 40ºC / 30% - 90% (no condensation)
Power / Consumption	100VAC - 240VAC ±10%, 50/60Hz / Approx. 22VA (13W) at 100VAC - 120VAC
Dimensions / Weight	212 (W) x 44 (H) x 350 (D) mm / Approx. 2.5kg
Accessories	Operation manual, AC cord
Options	Single or dual mounr rack bracket, DCC-OU: Remote control unit

*: All parameters can be set only DCC-OU (option).